Printable herringbone plan

Smallest perimeter piece

Calculating…

—

Checking the product module, both piece directions and every perimeter cut.

Dashed green is the working spine. A/B pieces meet at 90°. Hatching marks cuts; ochre marks pieces below your entered minimum.

Inspect a perimeter cut

Set-out and ordering assumptions

Dimensions use the measured face plus the intended joint. Every installed piece is charged to fresh stock; no offcut reuse is credited. Verify product approval, A/B locking edges, perimeter gap and final wall fits before cutting.

Laying order

Piece IDs run from the top of the drawing downward. A and B are the two perpendicular orientations, not a claim about the locking profile printed on your carton.

Piece	Direction	Type	Smallest span

Grouped perimeter cuts

Each drawing shows the kept shape on the complete stock face. The dashed rectangle is the original stock; dark edges remain factory edges and heavy green edges are saw cuts. Dots label distances from the named datum. Mirrored cuts stay separate.

One rectangular room, one measured product, unbordered single or double herringbone. This planning sheet does not approve the product, locking sequence, substrate, adhesive, grout, border, transitions or an out-of-square room.

Download SVG plan